AR550 Body Armor Swimmers Cut and Spartan Plate Carrier Entry Level Package
While Supplies Last....
"Spartan" Swimmers Cut Plate Carrier with AR550 Level III+ Body Armor (Front, Back and Side Plates)
When purchasing this package you will receive:
(1) "Spartan" Swimmers Cut Plate Carrier (Choose between, Black, OD Green, Tan or Wolf Gray)
(2) AR550 10x12 Swimmers Cut Body Armor Chest/Back Plates, Single Curve, Base Coat
(2) AR550 6x6 Omega Body Armor Side Plates, Curved, Base Coat
With all of our AR500, AR550 & AR650 Armaply Spartan Armor Systems™ products, we only use ballistic grade LAB CERTIFIED Steel! All purchases of our Spartan Armor products have current lab certificates included. Remember, not all body armor is created equal!
Weight on the AR550 Swimmers Cut Plates: Base Coat 10x12: 6lbs 10OZ 6x6 Side Plates: 2lbs 9oz
Features of the Spartan Carrier:
Adjustable from Medium to XL.
Designed for our Steel Core armor plates.
Molle on front and back for versatility. Velcro on front and back for patch placement.
Cummerbund is designed to hold 6x6 side plates comfortably.
Shoulder pads included.
860 Denier Poly construction.
Reinforced drag handle
Designed in the USA
NOTE: This carrier is designed to fit swimmers cut plates manufactured by Spartan Armor Systems. We can not guarantee a fit with plates made by other manufacturers.
Level III+ Spartan AR550 Armor
We’ve taken our Level III Body Armor to a NEW level! Spartan Armor Systems™ is pleased to introduce our AR550 Body Armor! With a 10% increase in ballistic core hardness, our level III+ AR550 armor defeats higher velocity threats such as XM193, M855, and M80! We’re special rifle threat validated!
Our AR550 armor hits the “sweet spot” in the Brinnell Hardness (BHN) range. With a core hardness of approximately 545-560 BHN, we have found our ballistically rated variant of AR550 that we use is perfect for defeating higher velocity threats, while not exposing the armor plate to extreme stress due to forming.
Our AR550 Level III+ armor has our GEN2 lower cut radius. With a 10% increase in core hardness, this ballistic grade steel is much harder than AR500, but not too hard to cause severe stress while forming.
With higher velocity rifle threats commonly present throughout the United States, we’ve developed this AR550 armor to specifically defeat some common threats such as 5.56 x 45 XM193, 5.56 x 45 M855 /SS109 and 7.62 x 51 (.308 Winchester) at a rated velocity of 3,100 fps or less. Additionally, we’ve successfully defeated these threat profiles from Close Quarters Battle (CQB) distances…repeatedly!
Chest Plate Weight (per plate): 10x12 AR550 Swimmers Cut: Base Coat 6lbs 10oz.
Side Plate Weight (per plate): 6×6 approximately 2lbs 9oz (base coat)
Thickness: .25″ AR550 plus approximately .25″ coating makes this slim profile plate overall .5-.6″ in total thickness
Please see our FAQ for weight specifications and other questions you may have.
As with all of our AR550 Armor products, we only use the highest grade of AR550 to manufacture our armor! Remember, not all body armor is created equal! Read our “FAQ” to find out more about the AR550 Armor we use to construct our body armor!
Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR) - US Export Regulations:
Level III and IV rifle rated body armor (Rifle Plates) fall under jurisdiction of the Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR), and are subject to the export control laws of the US Government. Export or re-transfer of Rifle Plates by any means to any foreign end user or for any other end use, whether in the US or abroad without written approval of the US Department of Commerce or Department of State is prohibited.
The sale, transfer, transportation, or shipment outside of the US of any product prohibited or restricted for export without complying with US export control laws and regulations, including proper export licensing, documentation or authorization, is strictly prohibited and may result in civil penalties and/or constitute a federal crime. Spartan Armor Systems, TK Armor Systems, LLC will not engage in any transaction that requires the illegal export of any products and will not assist directly or indirectly with the illegal export or re-export of any products.
See A Comparison of Our Full Line of Body Armor:
Need help selecting the right body armor for your loadout? This video provides an overview of Spartan Armor Systems AR500 Omega™, AR550 and AR650 NIJ rated steel core body armor products. We compare and contrast the differences in each type of body armor such as thickness, cut (shooters vs swimmers cut), weight and coverage area to help you select the body armor that's right for you. You can find all our products at https://spartanarmorsystems.com including steel core body armor, ceramic body armor, plate carriers, trauma pads, medical kits, ballistic helmets, magazine pouches and more. https://www.facebook.com/spartanarmorsystems/ https://www.instagram.com/spartan_armor/
Which Body Arm...Need help selecting the right body armor for your loadout? Thi...
Spartan Armor ...GET YOUR ARMOR HERE: https://bit.ly/3h9wRlf SUPPORT US BY PURC...
Spartan Armor ...A quick glimpse at how Spartan Armor Systems steel core body a...
Spartan Armor ...Overview and testing of our Spartan Armor Systems Armaply™ Adv...
SPARTAN Armapl...Video by IraqVeteran8888 putting our Level III+ Armaply body a...
Product Overvi...AR550 body armor is one of the strongest materials that we cur...
Which Body Armor Plates Should I Buy? | Spartan Armor Systems Comparison: AR500 Omega™ AR550 AR650(03:57)
Spartan Armor Systems Level III+ AR550 Body Armor(09:24)
Spartan Armor Systems Laser-Cut Steel Core Body Armor(01:14)
Spartan Armor Systems Advanced Triple Curve Level III+ Body Armor Plates(04:32)
SPARTAN Armaply Level III+ Body Armor Test by IraqVeteran8888(16:09)
Product Overview: AR550 Steel Core Body Armor by Spartan Armor Systems(00:37)