SPARTAN™ OMEGA™ AR500 BODY ARMOR SHOOTERS CUT SET OF TWO 10"x12" - Advanced Triple Curve (ATC) with Full Coat Encapsaloc™
Armor befitting of a modern-day Spartan… The Spartan™ Omega™ AR500 Body Armor is sold as a pair of plates, and is constructed from ¼” thick lab certified AR500 Omega™ Armor ballistic-grade steel. The Spartan Omega AR500 plates are available in three sizes (8”x10”, 10”x12” and 11”x14”) and provide the operator with Level III protection in accordance with NIJ0101.06 standards. As with all other body armor sold by Spartan Armor Systems®, our Spartan™ Omega™ AR500 body armor has been independently tested and verified by an independent NIJ credentialed laboratory.
Spartan™ Omega™ AR500 Body Armor - True High-Quality Ballistic Threat Protection
Not all steel core body armor is created equal! At Spartan Armor Systems® we are honored to provide our customers with the highest quality armor on the market because we understand intimately what is at stake. All Spartan™ Omega™ AR500 Body Armor products use only ballistic LAB CERTIFIED AR500 steel. All purchases of our Spartan Armor products have current lab certificates available on request, ensuring you have peace of mind when it comes to receiving the highest quality and integrity with your Spartan Armor Systems® body armor. For added peace of mind, every plate of armor sold by Spartan Armor Systems® is serialized allowing it to be easily tracked back to the original plate of steel it was cut from should there be any question as to its ballistic properties. Don’t settle for sub-standard, ineffective, low-quality steel armor - your life may depend on it. Read our "FAQ" to learn more about the extensive testing and quality assurance all Spartan™ Omega™ AR500 Body Armor is subjected to and to learn about the quality of steel we use to construct our body armor!
Laser Cut to Protect Ballistic Integrity
All steel core body armor is cut and shaped after the ballistic properties have been formulated within the steel. While other steel body armor manufacturers commonly use plasma torch cutting that applies excessive heat (25,000 ˚C / 45,000 ˚F) to a wide portion of the steel plate, Spartan Armor Systems® only utilizes laser cutting to protect the ballistic integrity throughout the entirety of each steel core body armor plate we manufacture. Plasma cutting also requires grinding to clean up the edges after the fact, resulting in increased heat and possible fatigue. At Spartan Armor Systems®, we maintain the highest production integrity and quality standards every step of the way for our customers because we know what is at stake.
Additional Protection: Full Coat
Our proprietary plate coating, Encapsaloc™, is a potentially life-saving feature that captures spalling as a result of ballistic impacts on the strike face of the steel core armor plate. Do not settle for steel armor that is merely coated with generic truck bed liner spray coatings that have not been tested for ballistic efficacy. The strike face of our Spartan Armor Systems® Spartan™ Omega™ AR500 Body Armor plates proudly bears the mark of our Spartan logo.
Exceptional Comfort & Engineering
These body armor plates come in our proprietary and patented Advanced Triple Curve™ (ATC) formation. It is important to note that our ATC design is a true multi-curve plate with unique curvature at the top, bottom, and sides of the plate. At Spartan Armor Systems® we have machined custom tooling to craft our plates with a sleek curvature that conforms and wraps to your torso for enhanced ergonomics. Spartan Armor Systems®™ is proud to be the FIRST in the industry to commercially offer the triple-curved Spartan™ Omega™ AR500 Body Armor. Spartan Armor Systems®’ ATC body armor allows the operator to shoulder their weapon with the most freedom and limited discomfort. The ATC design provides a snug, comfortable fit and “hugs” the operator’s body, resulting in a significant increase in comfort and operational maneuverability. Our custom-configured CNC equipment and advanced understanding of what makes Steel Core Armor most effective has allowed us to create dies that form our body armor without any “crease” bends. Crease-bends, “work hardens” the plate, which causes a significant amount of stress to the portion of the plate being placed under load during the manufacturing process. We HIGHLY suggest when doing your research, that you ask any manufacturer under consideration if they crease bend their body armor. This process results in increased potential for plate fatigue and failure, which is why Spartan Armor Systems®™ has gone the extra mile to create this unique die process.
Chest Plate Weight (per plate):
- 10"x12" Plate: Full Coat 9lbs 11oz.
Side plates also available in 6”x6” and 6”x8” sizes, click here to learn more.
Additional Spartan™ Omega™ AR500 Body Armor - Specs:
- Made in U.S.A.
- Meets NIJ 0101.06 Level III Specifications
- Comes in our Advanced Triple Curve™ configuration
- Full Coat of Encapsaloc™ Provides Fragmentation/Spall Mitigation
See A Comparison of Our Full Line of Body Armor:
Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR) - US Export Regulations:
Level III and IV rifle rated body armor (Rifle Plates) fall under jurisdiction of the Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR), and are subject to the export control laws of the US Government. Export or re-transfer of Rifle Plates by any means to any foreign end user or for any other end use, whether in the US or abroad without written approval of the US Department of Commerce or Department of State is prohibited.
The sale, transfer, transportation, or shipment outside of the US of any product prohibited or restricted for export without complying with US export control laws and regulations, including proper export licensing, documentation or authorization, is strictly prohibited and may result in civil penalties and/or constitute a federal crime. Spartan Armor Systems, TK Armor Systems, LLC will not engage in any transaction that requires the illegal export of any products and will not assist directly or indirectly with the illegal export or re-export of any products.
*******All products available on this category are sold under and branded under Spartan Armor Systems ™ The Target Man’s /Spartan Armor Systems Spartan™ Omega™ AR500 Body Armor Armor products are manufactured from genuine, lab-certified AR500 ballistic grade steel. None of the products available on this website are sourced from, sponsored or approved by, affiliated with or in any way connected with Armored Republic, LLC.
SPARTAN ARMOR SYSTEMS® SENTINEL PLATE CARRIER
The Spartan Armor Systems® Sentinel Plate Carrier is an extremely rugged, lightweight, feature-packed plate carrier that affords users a high degree of comfort and customization. Whether you are shopping for your first plate carrier or your next plate carrier, the Sentinel carrier platform allows the operator significant freedom to build and customize to fit their needs.
Ready For Anything
Fitting 38” to 48” chest sizes, the Sentinel Plate Carrier is fabricated from 1000 denier fabric and fits 10"x12" shooters cut plates. Featuring anti-slip shoulder padding with velcro, side release buckles, and a highly breathable padded mesh throughout the interior for comfort the Sentinel Plate Carrier affords all-day comfort and wearability. The removable cummerbund features removable side plate pockets for both 6"x6" and 6"x8" plate armor inserts for added protection. The Spartan Armor Systems Sentinel Plate Carrier has been one of our most popular carriers with thousands having been sold to Law Enforcement Officers and Civilians alike.
Spartan Armor Systems® Sentinel Plate Carrier Specs:
- Adjustable from 38" To 48" Chest Size
- Durable Emergency Drag Handle
- Anti-slip Shoulder Padding With Velcro
- Side Release Buckles On The Internal Waist Strap
- Padded Mesh Separators For The Interior Of The Carrier For Breathability
- Fits 10" X 12" Shooters Cut Plates
- Removable Cummerbund With Side Plate Pockets For 6" X 6" And 6" X 8" Side Plate Armor
- Velcro In Front Of The Carrier Is 8” X 4” With A Velcro Loop On Each Side
- Velcro On The Back Of The Carrier Measures 9” X 3”
- Stronger Carrier Material That Can Withstand Extensive Wear And Tear Over A Long Period Of Time
- 1000 Denier
- Bottom Loading
- Weighs Approximately 2lbs. 9oz.
NOTE: This plate carrier CAN accept 6"x8" side plates. There is a flap of Velcro inside each side plate pocket that must be flipped vertically to allow for 6"x8" side plates.
SPARTAN ARMOR SYSTEMS® ACHILLES LASER CUT PLATE CARRIER
The Achilles Laser Cut Plate Carrier pays homage to the legendary Greek warrior, Achilles, a great hero of the Trojan War. Lightweight, durable, and highly adaptable the Achilles carrier is designed for the modern-day multi-role warrior. Comprised of lightweight 1000 Denier laser-cut Molle and featuring comfortable padded shoulder straps and padded front and rear sections with ventilation vents, Spartan Armor Systems® has also enhanced the capability of the Achilles Laser Cut Plate Carrier by adding our top-zippered admin pouch above a convenient kangaroo pouch that comes with removable triple M4 mag pouches.
Added Comfort And Capability
Capability and comfort keep you in the fight longer. The Achilles Laser Cut Plate Carrier will accept both 10"x12" and 11"x14" body armor. For example, to increase comfort and protection it is possible to run our Flex Fused Core IIIA soft armor behind steel core plates such as our III+ AR550 10"x12" body armor utilizing the dual-chamber system! The cummerbund accepts side plates (6”x6” or 6"x8") and is modular/removable, with the inclusion of the built-in 2-inch quick-release straps. The configuration and customization options with the Achilles Laser Cut Plate Carrier are endless.
Achilles Laser Cut Plate Carrier Specs:
- 1000 Denier Materials
- Lightweight And Duty 1000 Denier Laser Cut Molle
- Zippered Admin Pouch
- Kangaroo Pouch With Removable Triple M4 Pouches
- Padded Shoulder Pads
- Padded Front And Rear With Ventilation Vents
- Low Profile Drag Handle
- Molle Velcro Front And Rear For Identifier Patches
- 2-inch Replaceable Quick-release Buckles
- Accepts 10"X12" And 11"X14" Body Armor
- 6"X6" And 6"X8" Side Plates
- Fits S To XL