SPARTAN™ OMEGA™ AR500 BODY ARMOR SIDE PLATES
Armor befitting of a modern-day Spartan… The Spartan™ Omega™ AR500 Body Armor is sold as a pair of plates, and is constructed from ¼” thick lab certified AR500 Omega™ Armor ballistic-grade steel. Spartan™ Omega™ AR500 plates provide the operator with Level III protection in accordance with NIJ0101.06 standards. As with all other body armor sold by Spartan Armor Systems®, our Spartan™ Omega™ AR500 body armor has been independently tested and verified by an independent NIJ credentialed laboratory.
Spartan™ Omega™ AR500 Body Armor - True High-Quality Ballistic Threat Protection
Not all steel core body armor is created equal! At Spartan Armor Systems® we are honored to provide our customers with the highest quality armor on the market because we understand intimately what is at stake. All Spartan™ Omega™ AR500 Body Armor products use only ballistic LAB CERTIFIED AR500 steel. All purchases of our Spartan Armor products have current lab certificates available on request, ensuring you have peace of mind when it comes to receiving the highest quality and integrity with your Spartan Armor Systems® body armor. For added peace of mind, every plate of armor sold by Spartan Armor Systems® is serialized allowing it to be easily tracked back to the original plate of steel it was cut from should there be any question as to its ballistic properties. Don’t settle for sub-standard, ineffective, low-quality steel armor - your life may depend on it. Read our "FAQ" to learn more about the extensive testing and quality assurance all Spartan™ Omega™ AR500 Body Armor is subjected to and to learn about the quality of steel we use to construct our body armor!
Laser Cut to Protect Ballistic Integrity
All steel core body armor is cut and shaped after the ballistic properties have been formulated within the steel. While other steel body armor manufacturers commonly use plasma torch cutting that applies excessive heat (25,000 ˚C / 45,000 ˚F) to a wide portion of the steel plate, Spartan Armor Systems® only utilizes laser cutting to protect the ballistic integrity throughout the entirety of each steel core body armor plate we manufacture. Plasma cutting also requires grinding to clean up the edges after the fact, resulting in increased heat and possible fatigue. At Spartan Armor Systems®, we maintain the highest production integrity and quality standards every step of the way for our customers because we know what is at stake.
Additional Protection: Full Coat or Base Coat Options
We strongly recommend choosing our full coat option when you buy steel core body armor. Our proprietary plate coating, Encapsaloc™, is a potentially life-saving feature that captures spalling as a result of ballistic impacts on the strike face of the steel core armor plate. Do not settle for steel armor that is merely coated with generic truck bed liner spray coatings that have not been tested for ballistic efficacy. The strike face of our Spartan Armor Systems® Spartan™ Omega™ AR500 Body Armor plates proudly bears the mark of our Spartan logo.
IMPORTANT NOTE: The base coat option only provides protection against corrosion and offers little to no fragmentation/spall mitigation. Should you choose to select base coat plates, please consider adding our Spall Containment Sleeve (sold separately) as a means of fragmentation mitigation.
Side Plate Weight (per plate):
- 6×6 approximately 2lbs 1oz (base coat) or 2lbs 15oz (full coat)
- 6×8 approximately 3lbs 10oz (base coat) or 3lbs 14oz (full coat)
Additional Spartan™ Omega™ AR500 Body Armor - Specs:
- Made in U.S.A.
- Meets NIJ 0101.06 Level III Specifications
- Full Coat Option Provides Fragmentation/Spall Mitigation, Base Coat Provides Corrosion Protection Only
See A Comparison of Our Full Line of Body Armor:
Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR) - US Export Regulations:
Level III and IV rifle rated body armor (Rifle Plates) fall under jurisdiction of the Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR), and are subject to the export control laws of the US Government. Export or re-transfer of Rifle Plates by any means to any foreign end user or for any other end use, whether in the US or abroad without written approval of the US Department of Commerce or Department of State is prohibited.
The sale, transfer, transportation, or shipment outside of the US of any product prohibited or restricted for export without complying with US export control laws and regulations, including proper export licensing, documentation or authorization, is strictly prohibited and may result in civil penalties and/or constitute a federal crime. Spartan Armor Systems, TK Armor Systems, LLC will not engage in any transaction that requires the illegal export of any products and will not assist directly or indirectly with the illegal export or re-export of any products.
*******All products available on this category are sold under and branded under Spartan Armor Systems ™ The Target Man’s /Spartan Armor Systems Spartan™ Omega™ AR500 Body Armor Armor products are manufactured from genuine, lab-certified AR500 ballistic grade steel. None of the products available on this website are sourced from, sponsored or approved by, affiliated with or in any way connected with Armored Republic, LLC.
Videos Hide Videos Show Videos
Spartan Armor Systems Advanced Triple Curve Level III+ Body Armor Plates
Overview and testing of our Spartan Armor Systems Armaply™ Adv...
Which Body Armor Plates Should I Buy? | Spartan Armor Systems Comparison: AR500 Omega™ AR550 AR650
Need help selecting the right body armor for your loadout? Thi...
Spartan Armor Systems Laser-Cut Steel Core Body Armor
A quick glimpse at how Spartan Armor Systems steel core body a...
Spartan™ Omega™ AR500 and Spartan AR550 Steel Core Body Armor by Spartan Armor Systems®
Not all steel core body armor is created equal. Our high quali...